Eight sub-brands, twenty-nine products, one naming logic.

Localized fixing and seaming of MLI and reflective insulation in cryogenic and vacuum-jacketed systems.

Strong-adhesion seaming for LNG, LH2 and large-area MLI packages where foil tape alone tears under handling.

Lightweight overlap sealing and low-mass fixing where a full aluminum foil backing is thicker than needed.

Cryogenic-compatible electrical insulation and high-temperature masking where a thin, dimensionally stable backing is required.

Mechanical protection and reinforcement of insulation packages, where tear resistance matters more than reflectivity.

Solder masking, wave-solder protection, coil and transformer insulation, and 3D-print bed surfaces.

Powder-coating masking, PCB plating and conformal-coating protection, and heat-transfer printing.

Spray painting, lacquering, wall and woodwork masking, with controlled edge bleed and easy removal.

Release surfaces, heat-sealer and packaging-machine covers, chute liners and non-stick protection.

Tear-resistant strapping, splicing and general reinforcement where a hand-tearable backing is too weak.

Structural mounting of panels, nameplates, trims and decorative parts, absorbing thermal expansion and vibration.

Bonding of components, display modules, labels and fixtures where two different surfaces must be joined.

Thin, gap-free bonding of film, foil and paper where a carrier backing would add unwanted thickness.

Grounding, EMI shielding, static discharge paths and RF gasketing in electronics assemblies.

Flexible EMI shielding of cables, FPC and connectors where repeated flexing would crack foil.

Heat spreading from LED modules, power devices and battery packs where a clamped gap pad is impractical.

Backlight edge sealing, camera module masking and bezel shading where light leakage must be blocked.

Display lamination, touch panel bonding and transparent overlay assembly where clarity and haze are specified.

Protecting metal, plastic and glass surfaces during fabrication, storage, transport and installation.

Temporary protection of PCB, FPC and sensitive assemblies in ESD-controlled production areas.

Duct sealing, insulation facing, pipe wrapping and reflective vapour barrier repair in HVAC work.

Roof, gutter, pipe and metal-sheet leak repair where a self-sealing waterproof layer is needed.

Repairing roof seams, flashing and photovoltaic mounting penetrations exposed to weather long-term.

Stairs, ramps, machine steps and wet areas where slip resistance must be added to an existing surface.

Marking edges, barriers, vehicles and low-light walkways where visibility from a light source matters.

Joining carpet tiles, exhibition flooring and temporary floor coverings without a permanent seam.

Carton closure, bundling and logistics sealing, with printable surfaces for brand and handling marks.

Roll-to-roll splicing of paper, film and foil webs at speed, including repulpable grades for paper mills.

Bundling, pallet wrapping and light-duty closure where fast initial tack matters more than long-term shear.